View HIF6A-34DA-127DSAL_4563895.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
1.27mm Pitch Two-Piece Connector
HIF6 Series
Connector in combination with the HIF6 series connection type
qHIF3B Series (MIL-C-83503) qHIF2 Series (Board direct mount type)
1 qHIF5 Series (Card edge type)
2
sFeatures
1. Product Variation
The connection method is available with the board to board type and insulation displacement type.
2. Broad applications
HIF2E, HIF3B and HIF5 can be combined one other, because the 1.27mm pitch flat cable is used.
qRC Series (Micro ribbon connector)
qFD Series (D sub-ribbon connector)
3. Applicable Cables
The applicable cable is a (UL2651) AWG #28 flat cable (7cores: 0.127mm, outer jacket diameter: 0.8 to1.0mm)
4. Mis-insertion Preventive Structure
The mis-insertion preventive guide prevents misinsertion.
Photo1 (For further information, refer to catalog page B86.)
sApplications
Computers, peripheral and terminal equipment, PPC, various kinds of electronic equipment, Office Automation machines
sProduct Specifications
Rating Current rating: 0.5A Operating Temperature Range: -55 to +85 c (Note 1) Storage Temperature Range: -10 to +60c (Note 2) Operating Humidity Range: 40 to 70% (Note 2) Voltage rating: 125V AC Operating Humidity Range: 40 to 80%
Item 1.Insulation Resistance 1000M ohms min.
Specification 250V DC 300V AC/1 minute. 0.1A
Condition
2.Withstanding Voltage No flashover or insulation breakdown. 3.Contact Resistance 4.Vibration 30m ohms max. No electrical discontinuity of 1s or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 96 hours at temperature of 40c and humidity of 90% to 95% (-65c: 30 minutes15 to 35c: 5 minutes max. 125c: 30 minutes15 to 35c: 5 minutes max.) 5 cycles 500 cycles Solder bath: 260c for 10 seconds Manual soldering: 360c for 5 seconds
5.Humidity (Steady state) Insulation resistance: 1000M ohms min. 6.Temperature Cycle No damage, cracks, or parts looseness.
7.Durability (Mating/un-mating) Contact resistance: 30m ohms max. 8.Resistance to Soldering heat No deformation of components affecting performance.
Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. Note 4: Please note that there is a risk of deforming the lock when an excessive load is applied to the inside.
B69
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. HIF6 Seriesq1.27mm Pitch Two-Piece Connector
sMaterial
Parts Insulator Socket Contact Pin header Contact Material PBT Copper alloy Brass Finish Black Selective gold plating Remarks UL94V-0 --------
sOrdering Information
qSocket and Receptacle
HIF6 A - * D A - 1.27 DSA L
q w e r t y u i q Series Name : HIF6 w Blank
: Ribbon cable insulation displacement type : Without board mounting hole : With board mounting hole : Socket or receptacle : Selective gold plated : Right angle type : Ribbon cable ID type
A B
r t
e Number of contacts : 20, 26, 32, 34, 40, 50, 52, 60, 68, 80, 100
D A
y Contact pitch : 1.27mm u Contact type : DS
DSA : Straight type R
i L : Board pre-fixed lock pin
qPin Header
HIF6 A - * P A - 1.27 DSA L
q w e r t y u i q Series Name : HIF6 w Blank
: With lock : Without board mounting hole : With board mounting hole : Pin header : Selective gold plated : Right angle type : Straight type
A B
r t
e Number of contacts : 20, 26, 32, 34, 40, 50, 52, 60, 68, 80, 100
P A
y Contact pitch : 1.27mm u Contact style : DS
DSA
i L : Board pre-fixed lock pin
B70
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. HIF6 Seriesq1.27mm Pitch Two-Piece Connector
BFunction Chart
Pin Header
Socket or Receptacle Side
Right Angle Type with lock
Two pieces of 1.27mm pitch cable used a2.54 pitch connector (MIL-C-83503) HIF2B series HIF3B series HIF5 series
Straight Type with lock
Ribbon cable FD (D sub) connector Ribbon cable RC30 (Micro ribbon) connector
Right Angle Type with mounting hole
Right Angle Type with mounting hole
Straight Type with mounting hole Straight Type with mounting hole
Right Angle Type without mounting hole Right Angle Type without mounting hole
Straight Type without mounting hole Straight Type without mounting hole
B71
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. HIF6 Seriesq1.27mm Pitch Two-Piece Connector
sCable ID Connector
Unit: mm
Unit: mm Part Number HIF6-020D-1.27R HIF6-026D-1.27R HIF6-032D-1.27R HIF6-034D-1.27R HIF6-040D-1.27R HIF6-050D-1.27R HIF6-052D-1.27R HIF6-060D-1.27R HIF6-068D-1.27R HIF6-080D-1.27R HIF6-100D-1.27R CL No. 630-0001-4 630-0002-7 630-0003-0 630-0004-2 630-0005-5 630-0006-8 630-0007-0 630-0008-3 630-0009-6 630-0010-5 630-0011-8 Number of Contacts 20 26 32 34 40 50 52 60 68 80 100 A 18.55 22.36 26.17 27.44 31.25 37.60 38.87 43.95 49.03 56.65 69.35 B 11.43 15.24 19.05 20.32 24.13 30.48 31.75 36.83 41.91 49.53 62.23 C 13.95 17.76 21.57 22.84 26.65 33.00 34.27 39.35 44.43 52.05 64.75 D 16.35 20.16 23.97 25.24 29.05 35.40 36.67 41.75 46.83 54.45 67.15 YES RoHS
B72
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. HIF6 Seriesq1.27mm Pitch Two-Piece Connector
sPin Header Right Angle Type with lock
Unit: mm
n=
Number of Contacts 2
Note : Size F indicates the state where the lock is open.
BPCB mounting pattern
q Indicate Mating Side mark position. Mating Side
Unit: mm Part Number
HIF6-020PA-1.27DS HIF6-026PA-1.27DS HIF6-032PA-1.27DS HIF6-034PA-1.27DS HIF6-040PA-1.27DS HIF6-050PA-1.27DS HIF6-052PA-1.27DS HIF6-060PA-1.27DS HIF6-068PA-1.27DS HIF6-080PA-1.27DS HIF6-100PA-1.27DS CL No. 630-0051-2 630-0052-5 630-0053-8 630-0054-0 630-0055-3 630-0056-6 630-0057-9 630-0058-1 630-0059-4 630-0060-3 630-0061-6
Number of Contacts
20 26 32 34 40 50 52 60 68 80 100
A 30.95 34.76 38.57 39.84 43.65 50.00 51.27 56.35 61.43 69.05 81.75
B 11.43 15.24 19.05 20.32 24.13 30.48 31.75 36.83 41.91 49.53 62.23
C 24.55 28.36 32.17 33.44 37.25 43.60 44.87 49.95 55.03 62.65 75.35
D 18.75 22.56 26.37 27.64 31.45 37.80 39.07 44.15 49.23 56.85 69.55
E 21.59 25.40 29.21 30.48 34.29 40.64 41.91 46.99 52.07 59.69 72.39
F 43.55 47.36 51.17 52.44 56.25 62.60 63.87 68.95 74.03 81.65 94.35
RoHS
YES
B73
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. HIF6 Seriesq1.27mm Pitch Two-Piece Connector
sPin Header Straight Type with lock
Unit: mm
n=
Number of Contacts 2
BPCB mounting pattern
Guide Key Side
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
Guide Key Side
q Indicate
mark position. (26, 34, 50 contacts) Note : Size G indicates a state where the lock is open.
(26, 34, 50 contacts) Unit: mm Part Number CL No. Number of Contacts 20 26 32 34 40 50 52 60 68 80 100 A 30.95 34.76 38.57 39.84 43.65 50.00 51.27 56.35 61.43 69.05 81.75 B 11.43 15.24 19.05 20.32 24.13 30.48 31.75 36.83 41.91 49.53 62.23 C 24.55 28.36 32.17 33.44 37.25 43.60 44.87 49.95 55.03 62.65 75.35 D 18.75 22.56 26.37 27.64 31.45 37.80 39.07 44.15 49.23 56.85 69.55 E 14.95 18.76 22.57 23.84 27.65 34.00 35.27 40.35 45.43 53.05 65.75 F 21.59 25.40 29.21 30.48 34.29 40.64 41.91 46.99 52.07 59.69 72.39 G 43.55 47.36 51.17 52.44 56.25 62.60 63.87 68.95 74.03 81.65 94.35 YES RoHS
HIF6-020PA-1.27DSA(71) 630-0101-9-71 HIF6-026PA-1.27DSA(71) 630-0102-1-71 HIF6-032PA-1.27DSA(71) 630-0103-4-71 HIF6-034PA-1.27DSA(71) 630-0104-7-71 HIF6-040PA-1.27DSA(71) 630-0105-0-71 HIF6-050PA-1.27DSA(71) 630-0106-2-71 HIF6-052PA-1.27DSA(71) 630-0107-5-71 HIF6-060PA-1.27DSA(71) 630-0108-8-71 HIF6-068PA-1.27DSA(71) 630-0109-0-71 HIF6-080PA-1.27DSA(71) 630-0110-0-71 HIF6-100PA-1.27DSA(71) 630-0111-2-71
B74
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. HIF6 Seriesq1.27mm Pitch Two-Piece Connector
sReceptacle Right Angle Type with Mounting hole
Unit: mm
n=
Number of Contacts 2
BPCB mounting pattern
Mating Side
BApplication Pattern
(20, 32, 40, 52, 60, 68, 80 contacts) Mating Side
Mounting hole center line (26, 34, 50 contacts) Unit: mm Part Number CL No. Number of Contacts 20 26 32 34 40 50 52 60 68 80 A 30.95 34.76 38.57 39.84 43.65 50.00 51.27 56.35 61.43 69.05 B 20.95 24.76 28.57 29.84 33.65 40.00 41.27 46.35 51.43 59.05 C 11.43 15.24 19.05 20.32 24.13 30.48 31.75 36.83 41.91 49.53 D 26.67 30.48 34.29 35.56 39.37 45.72 46.99 52.07 57.15 64.77 E 18.55 22.36 26.17 27.44 31.25 37.60 38.87 43.95 49.03 56.65 YES RoHS HIF6B-20DA-1.27DS(71) 631-0051-9-71 HIF6B-26DA-1.27DS(71) 631-0052-1-71 HIF6B-32DA-1.27DS(71) 631-0053-4-71 HIF6B-34DA-1.27DS(71) 631-0054-7-71 HIF6B-40DA-1.27DS(71) 631-0055-0-71 *Lock pin type is also available. HIF6B-50DA-1.27DS(71) 631-0056-2-71 HIF6B-52DA-1.27DS(71) 631-0057-5-71 HIF6B-60DA-1.27DS(71) 631-0058-8-71 HIF6B-68DA-1.27DS(71) 631-0059-0-71 HIF6B-80DA-1.27DS(71) 631-0060-0-71
B75
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. HIF6 Seriesq1.27mm Pitch Two-Piece Connector
sReceptacle Right Angle Type Without Mounting hole
Unit: mm
n=
Number of Contacts 2
BPCB mounting pattern
Mating Side
BApplication Pattern
(20, 32, 40, 52, 60, 68, 80 contacts)
Mating Side
(26, 34, 50 contacts) Unit: mm Part Number HIF6A-20DA-1.27DS(71) HIF6A-26DA-1.27DS(71) HIF6A-32DA-1.27DS(71) HIF6A-34DA-1.27DS(71) HIF6A-40DA-1.27DS(71) HIF6A-50DA-1.27DS(71) HIF6A-52DA-1.27DS(71) HIF6A-60DA-1.27DS(71) HIF6A-68DA-1.27DS(71) HIF6A-80DA-1.27DS(71) CL No. 631-0001-0-71 631-0002-3-71 631-0003-6-71 631-0004-9-71 631-0005-1-71 631-0006-4-71 631-0007-7-71 631-0008-0-71 631-0009-2-71 631-0010-1-71 Number of Contacts 20 26 32 34 40 50 52 60 68 80 A 20.95 24.76 28.57 29.84 33.65 40.00 41.27 46.35 51.43 59.05 B 11.43 15.24 19.05 20.32 24.13 30.48 31.75 36.83 41.91 49.53 C 18.55 22.36 26.17 27.44 31.25 37.60 38.87 43.95 49.03 56.65 YES RoHS
B76
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. HIF6 Seriesq1.27mm Pitch Two-Piece Connector
sReceptacle Straight Type with Mounting hole
Unit: mm
n=
Number of Contacts 2
BPCB mounting pattern
Guide Key Side
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
(26, 34, 50 contacts)
BApplication Pattern
(20, 32, 40, 52, 60, 68, 80, 100 contacts) Guide Key Side
(26, 34, 50 contacts)
Mounting hole center line Unit: mm Part Number CL No. Number of Contacts 20 26 32 34 40 50 52 60 68 80 100 A 30.95 34.76 38.57 39.84 43.65 50.00 51.27 56.35 61.43 69.05 81.75 B 26.67 30.48 34.29 35.56 39.37 45.72 46.99 52.07 57.15 64.77 77.47 C 11.43 15.24 19.05 20.32 24.13 30.48 31.75 36.83 41.91 49.53 62.23 D 18.55 22.36 26.17 27.44 31.25 37.60 38.87 43.95 49.03 56.65 69.35 YES RoHS
HIF6B-020DA-1.27DSA(71) 631-0151-3-71 HIF6B-026DA-1.27DSA(71) 631-0152-6-71 HIF6B-032DA-1.27DSA(71) 631-0153-9-71 HIF6B-034DA-1.27DSA(71) 631-0154-1-71 HIF6B-040DA-1.27DSA(71) 631-0155-4-71 *Lock pin type is also available. HIF6B-050DA-1.27DSA(71) 631-0156-7-71 HIF6B-052DA-1.27DSA(71) 631-0157-0-71 HIF6B-060DA-1.27DSA(71) 631-0158-2-71 HIF6B-068DA-1.27DSA(71) 631-0159-5-71 HIF6B-080DA-1.27DSA(71) 631-0160-4-71 HIF6B-100DA-1.27DSA(71) 631-0161-7-71
B77
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. HIF6 Seriesq1.27mm Pitch Two-Piece Connector
sReceptacle Straight Type without Mounting hole
Unit: mm
n=
Number of Contacts 2
BPCB mounting pattern
Guide Key Side
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
(26, 34, 50 contacts)
BApplication Pattern
(20, 32, 40, 52, 60, 68, 80, 100 contacts) Guide Key Side
(26, 34, 50 contacts) Unit: mm Part Number CL No. Number of Contacts 20 26 32 34 40 50 52 60 68 80 100 A 20.95 24.76 28.57 29.84 33.65 40.00 41.27 46.35 51.43 59.05 71.75 B 11.43 15.24 19.05 20.32 24.13 30.48 31.75 36.83 41.91 49.53 62.23 C 18.55 22.36 26.17 27.44 31.25 37.60 38.87 43.95 49.03 56.65 69.35 YES RoHS HIF6A-020DA-1.27DSA(71) 631-0101-5-71 HIF6A-026DA-1.27DSA(71) 631-0102-8-71 HIF6A-032DA-1.27DSA(71) 631-0103-0-71 HIF6A-034DA-1.27DSA(71) 631-0104-3-71 HIF6A-040DA-1.27DSA(71) 631-0105-6-71 HIF6A-050DA-1.27DSA(71) 631-0106-9-71 HIF6A-052DA-1.27DSA(71) 631-0107-1-71 HIF6A-060DA-1.27DSA(71) 631-0108-4-71 HIF6A-068DA-1.27DSA(71) 631-0109-7-71 HIF6A-080DA-1.27DSA(71) 631-0110-6-71 HIF6A-100DA-1.27DSA(71) 631-0111-9-71
B78
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. HIF6 Seriesq1.27mm Pitch Two-Piece Connector
sPin Header Right Angle Type with Mounting hole
Unit: mm
n=
Number of Contacts 2
BPCB mounting pattern
Mating Side
BApplication Pattern
(20, 32, 40, 52, 60, 68, 80, 100 contacts) Mating Side
Mounting hole center line (26, 34, 50 contacts) Unit: mm Part Number CL No. Number of Contacts 20 26 32 34 40 50 52 60 68 80 100 A 30.95 34.76 38.57 39.84 43.65 50.00 51.27 56.35 61.43 69.05 81.75 B 20.95 24.76 28.57 29.84 33.65 40.00 41.27 46.35 51.43 59.05 71.75 C 18.75 22.56 26.37 27.64 31.45 37.80 39.07 44.15 49.23 56.85 69.55 D 11.43 15.24 19.05 20.32 24.13 30.48 31.75 36.83 41.91 49.53 62.23 E 26.67 30.48 34.29 35.56 39.37 45.72 46.99 52.07 57.15 64.77 77.47 YES RoHS HIF6B-020PA-1.27DS(71) 631-0251-8-71 HIF6B-026PA-1.27DS(71) 631-0252-0-71 HIF6B-032PA-1.27DS(71) 631-0253-3-71 HIF6B-034PA-1.27DS(71) 631-0254-6-71 HIF6B-040PA-1.27DS(71) 631-0255-9-71 Lock pin type is also available. HIF6B-050PA-1.27DS(71) 631-0256-1-71 HIF6B-052PA-1.27DS(71) 631-0257-4-71 HIF6B-060PA-1.27DS(71) 631-0258-7-71 HIF6B-068PA-1.27DS(71) 631-0259-0-71 HIF6B-080PA-1.27DS(71) 631-0260-9-71 HIF6B-100PA-1.27DS(71) 631-0261-1-71
B79
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. HIF6 Seriesq1.27mm Pitch Two-Piece Connector
sPin Header Right Angle Type Without Mounting hole
Unit: mm
n=
Number of Contacts 2
BPCB mounting pattern
Mating Side
BApplication Pattern
(20, 32, 40, 52, 60, 68, 80, 100 contacts) Mating Side
(26, 34, 50 contacts) Unit: mm Part Number CL No. Number of Contacts 20 26 32 34 40 50 52 60 68 80 100 A 20.95 24.76 28.57 29.84 33.65 40.00 41.27 46.35 51.43 59.05 71.75 B 18.75 22.56 26.37 27.64 31.45 37.80 39.07 44.15 49.23 56.85 69.55 C 11.43 15.24 19.05 20.32 24.13 30.48 31.75 36.83 41.91 49.53 62.23 YES RoHS HIF6A-020PA-1.27DS(71) 631-0201-0-71 HIF6A-026PA-1.27DS(71) 631-0202-2-71 HIF6A-032PA-1.27DS(71) 631-0203-5-71 HIF6A-034PA-1.27DS(71) 631-0204-8-71 HIF6A-040PA-1.27DS(71) 631-0205-0-71 HIF6A-050PA-1.27DS(71) 631-0206-3-71 HIF6A-052PA-1.27DS(71) 631-0207-6-71 HIF6A-060PA-1.27DS(71) 631-0208-9-71 HIF6A-068PA-1.27DS(71) 631-0209-1-71 HIF6A-080PA-1.27DS(71) 631-0210-0-71 HIF6A-100PA-1.27DS(71) 631-0211-3-71
B80
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. HIF6 Seriesq1.27mm Pitch Two-Piece Connector
sPin Header Straight Type with Mounting hole
Unit: mm
n=
Number of Contacts 2
BPCB mounting pattern
Guide Key Side
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
(26, 34, 50 contacts)
BApplication Pattern
(20, 32, 40, 52, 60, 68, 80, 100 contacts) Guide Key Side
Mounting hole center line (26, 34, 50 contacts) Unit: mm Part Number CL No. Number of Contacts 20 26 32 34 40 50 52 60 68 80 100 A 30.95 34.76 38.57 39.84 43.65 50.00 51.27 56.35 61.43 69.05 81.75 B 26.67 30.48 34.29 35.56 39.37 45.72 46.99 52.07 57.15 64.77 77.47 C 20.95 24.76 28.57 29.84 33.65 40.00 41.27 46.35 51.43 59.05 71.75 D 11.43 15.24 19.05 20.32 24.13 30.48 31.75 36.83 41.91 49.53 62.23 E 18.75 22.56 26.37 27.64 31.45 37.80 39.07 44.15 49.23 56.85 69.55 YES RoHS HIF6B-020PA-1.27DSA(71) 631-0351-2-71 HIF6B-026PA-1.27DSA(71) 631-0352-5-71 HIF6B-032PA-1.27DSA(71) 631-0353-8-71 HIF6B-034PA-1.27DSA(71) 631-0354-0-71 HIF6B-040PA-1.27DSA(71) 631-0355-3-71 *Lock pin type is also available. HIF6B-050PA-1.27DSA(71) 631-0356-6-71 HIF6B-052PA-1.27DSA(71) 631-0357-9-71 HIF6B-060PA-1.27DSA(71) 631-0358-1-71 HIF6B-068PA-1.27DSA(71) 631-0359-4-71 HIF6B-080PA-1.27DSA(71) 631-0360-3-71 HIF6B-100PA-1.27DSA(71) 631-0361-6-71
B81
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. HIF6 Seriesq1.27mm Pitch Two-Piece Connector
sPin Header Straight Type Without Mounting hole
Unit: mm
n=
Number of Contacts 2
BPCB mounting pattern
Guide Key Side
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
(26, 34, 50 contacts)
BApplication Pattern
(20, 32, 40, 52, 60, 68, 80, 100 contacts) Guide Key Side
(26, 34, 50 contacts) Unit: mm Part Number CL No. Number of Contacts 20 26 32 34 40 50 52 60 68 80 100 A 20.95 24.76 28.57 29.84 33.65 40.00 41.27 46.35 51.43 59.05 71.75 B 11.43 15.24 19.05 20.32 24.13 30.48 31.75 36.83 41.91 49.53 62.23 C 18.75 22.56 26.37 27.64 31.45 37.80 39.07 44.15 49.23 56.85 69.55 YES RoHS HIF6A-020PA-1.27DSA(71) 631-0301-4-71 HIF6A-026PA-1.27DSA(71) 631-0302-7-71 HIF6A-032PA-1.27DSA(71) 631-0303-0-71 HIF6A-034PA-1.27DSA(71) 631-0304-2-71 HIF6A-040PA-1.27DSA(71) 631-0305-5-71 HIF6A-050PA-1.27DSA(71) 631-0306-8-71 HIF6A-052PA-1.27DSA(71) 631-0307-0-71 HIF6A-060PA-1.27DSA(71) 631-0308-3-71 HIF6A-068PA-1.27DSA(71) 631-0309-6-71 HIF6A-080PA-1.27DSA(71) 631-0310-5-71 HIF6A-100PA-1.27DSA(71) 631-0311-8-71
B82
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. HIF6 Seriesq1.27mm Pitch Two-Piece Connector
BConnection Circuit
Type A, B
(20, 32, 40, 52, 60, 68, 80, 100 contacts)
Number of Contacts 2
n=
Connection of Cable 1 A1 A2 an an
1
Connection of Cable 2 B1 B2 bn bn
1
******
******
An
a1
******
Bn
b1
Type A, A
Connection of Cable 1 A1 A2 b1 b2
Connection of Cable 2 B1 B2 a1 a2
******
******
******
An
bn
Bn
an
******
******
B83
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. HIF6 Seriesq1.27mm Pitch Two-Piece Connector
BConnection Circuit
Type A, B
(26, 40, 50 contacts)
Number of Contacts 2
n=
Connection of Cable 1 A1 A2 an an
1
Connection of Cable 2 B1 B2 bn bn
1
******
******
An
a1
******
Bn
b1
Type A, A
Connection of Cable 1 A1 A2 b1 b2
Connection of Cable 2 B1 B2 a1 a2
******
******
******
An
bn
Bn
an
B84
******
******
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. HIF6 Seriesq1.27mm Pitch Two-Piece Connector
BConnection Jig
qGuide Plate qHi-Flex Connection Press
Hi-Flex Connection Press HHP502 CL550 - 0082 - 2 HIF 6 - GPA CL550 - 0165 - 8 *Pressing Block Part Number Pressing Block A-01 CL No. 550-0133-1
qCable Cutter
qInstruction Manual for HIF6 Connection Service Method
HIF6 Cable Cutter-FC601 CL550 - 0166 - 0
14 Pages
B85
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. HIF6 Seriesq1.27mm Pitch Two-Piece Connector
sHIF6 Series: Connection Type Coupled Connector HIF3B Series (MIL-C-83503)
qCompliant with the MIL standard qThe VA idea is reflected on both pin header and socket. qProducts with pull-out tab are available. qCountermeasures are taken against noises in combination with the applicable cover case. qThe type aligned in single-row, low profile type, is available for pin header locking system, in addition to standard products. Number of contacts: 6, 10, 14, 16, 20, 26, 30, 34, 40, 50, 60, 64
HIF2 Series (Board direct mount type)
12-row parallel type (HIF2E) Number of contacts: 10, 14, 16, 20, 26, 30, 34, 40, 50, 60 2.54mm grid alignment facilitates to the design pattern. 24-row staggered type (HIF2C) Number of contacts: 10, 14, 16, 20, 26, 30, 34, 40, 50, 60 Mounting height is 4.9mm low profile type. 1 2
HIF5 Series (Card edge ribbon type)
qThree types of full hole, semi-hole and no mount area are provided for the unit mount area. qConnectors are connected in the bus line system. qCables can be returned within the connector mold width. Number of contacts: 20, 26, 34, 40, 50, 60
RC Series (Micro ribbon connector)
qSince the cable insulation displacement area is standard pitch 1.27mm, the standard ribbon cable can be easily utilized. qCountermeasures are taken against noises in combination with the cover case. qCover case is light weight and compact. qStraight and right angle types are installed on the dip side. Number of contacts: 14, 24, 36, 50
FD Series (D sub-ribbon connector)
qThe standard pitch 1.27mm ribbon cable can be insulated and displaced by replacing a jig, in addition to the same pitch 1.38mm as for the D sub connector. qThe space saving type allows to reduce the thickness on the connection side according to set miniaturization. qConnectors can be installed from both front and rear sides of the chassis or panel. Number of contacts: 9, 15, 25, 37
B86

▲Up To Search▲

Price & Availability of HIF6A-34DA-127DSAL

	To Download HIF6A-34DA-127DSAL Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .